Inbetriebnahme und
Programmierung
10 Programmiertaste der Türstation
Siedle Compact
Programmiermodus Türstation
(manuelle Programmierung): An der
Türstation die Programmiertaste 4
Sekunden gedrückt halten. Danach
ist ein langgezogener Quittungston
zu hören, der alle 5 Sekunden
kurz wiederholt wird, solange der
Programmiermodus aktiv ist.
Für die Inbetriebnahme und
Programmierung ist folgendes
Informationsprodukt zu beachten:
• Systemhandbuch
In-Home-Bus: Video
Technische Daten
Farbsystem: PAL
Bildaufnehmer: CMOS-Sensor 1/3"
756 x 504 Pixel
Auflösung: 550 TV-Linien
Objektiv: 3,7 mm
Blickwinkel: horizontal ca. 65°,
vertikal ca. 50°
Verstellbereich mechanisch:
30° horizontal/vertikal
2-stufige Heizung: 12 V AC,
max. 110 mA
Betriebsspannung:
über In-Home-Bus
Kontaktart: Schließer 24 V, 2 A
Schutzart: IP 54, IK 8
Umgebungstemperatur:
–20 °C bis +40 °C
Abmessungen (mm) B x H x T:
82 x 226 x 35
English
Application
Siedle Compact video door station in
bus technology, for installation in the
In-Home bus.
With the functions calling, speech,
vision and door release.
Number of integrated call buttons:
1–2
Performance features:
• Integrated camera with automatic
day/night switchover, LED lighting
and 2-stage heating
• Integrated door loudspeaker
• Adjustable voice volume
• Number of integrated call buttons:
1 (BCV 850-1-01), 2 (BCV 850-2-01)
• Acoustic button acknowledgement
can be activated
• Backlit nameplates exchangeable
from the front
• for surface mounting with brushed
stainless steel panel
Electrical voltage
Mounting, installation and servicing
work on electrical devices may only
be performed by a suitably qualified
electrician.
Electrostatic charging
As a result of electrostatic charging,
direct contact with the circuit board
can result in destruction of the
device. Direct contact with the circuit
board must therefore be avoided.
1 In the case of video systems, the
following mounting situation must
be avoided at all costs:
• direct backlight
• direct sunlight
• very bright image backgrounds
• highly reflective walls opposite the
camera
• lamps or direct light sources
Scope of supply
• BCV 850-...-01
• Siedle screwdriver
• This product information
Mounting
2 Unscrew the front of the housing.
To do this, release the Siedle screw
on the underneath of the housing.
Hinge the front of the housing
forward.
3 Surface mounting the door sta
tion. Recommended mounting
height appr. 1.50 m /4.9 ft. to centre
device. Please note: The cable is
inserted in the lower area of the
base plate!
4 Strip back the installation cable
close to the wall (appr. 10 mm) and
insert the cores into the base plate.
Fasten the base plate using 4 screws.
Close the two openings at the top
using rubber stoppers.
5 Install in accordance with the
wiring diagram. The cores may only
be laid in the admissible installation
space.
Circuit diagram note
a) The camera branch and monitor
branch must be laid separately and
must not be located in the same
cable. This can result in disturbance
to the picture composition.
7