Signalling - WEG LSP Serie Manual Del Usuario

First Time Power-Up and Start-Up

4.2 SIGNALLING

The LSP light curtain has visual signaling on the front, indicating the status of the light curtain.
EMITTER SIGNALLING
: When flashing, it indicates that is has detected failure in internal system.
: When ON, indicates presence of power supply.
RECEPTOR SIGNALLING
: When illuminated, it indicates that the emitter and receiver modules are in sync.
: When illuminated, it indicates that the safety outputs enable – ON STATE.
: When illuminated, it indicates that the safety outputs enable – OFF STATE.
When flashing, fault is detected in its internal system.
: When ON, it indicates that the light curtain is in programming mode, and when flashing
indicates that the light curtain is programed with blanking.
: Access to programming.
21 | LSP