How To Install Your Canopy Housing - Fanimation The Landan FPD8087 Serie Manual Del Usuario

How to Install Your Canopy Housing

1. Remove one of the two shoulder screws in the
hanger bracket. Loosen the second shoulder screw
without fully removing it. Assemble canopy by
rotating key slot in canopy over shoulder screw in
hanger bracket. Tighten shoulder screw. Fully
assemble and tighten second shoulder screw that
was previously removed (Figure 16).
WARNING
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the canopy
housing and not pinched between the housing and
the ceiling.
2. Securely attach and tighten the canopy screw
cover over the shoulder screws in the hanger
bracket utilizing the keyslot twist-lock feature
(Figure 17).
SHOULDER
SCREWS (2)
9
CANOPY
Figure 16
CANOPY COVER
Figure 17