Important; Fan Mounting - Harbor Breeze URBANIA Manual Del Usuario

INITIAL INSTALLATION
Secure mounting bracket (C) to outlet box using
4.
screws, spring washers, and flat washers
provided with the outlet box. (Fig. 4)
*NOTE: It is very important that you use the
proper hardware when installing the mounting
bracket (C) as this will support the fan.
IMPORTANT: If using the angle mount, make
sure open end of mounting bracket (C) is installed
facing the higher point of the ceiling.

FAN MOUNTING

Remove pin (N) and clip (O) from downrod (A).
1.
(Fig. 1A)
Partially loosen set screws in motor housing
yoke at top of motor housing (E). (Fig. 1B)
*Helpful Hint: Downrod style mounting is best
suited for ceilings 8 ft. (2.44 m) high or higher.
For taller ceilings you may want to use a longer
downrod (not included) than the one provided.
Angle style mounting is best suited for angled
or vaulted ceilings. A longer downrod is
sometimes necessary to ensure proper blade
clearance.
4
C
1A
A
O
8
1B
Set
Screw
N
E