Eagle Vision 1993-1997; Plymouth Fury 1975-1978 - Metra AT-512CR Instrucciones De Instalación

Chrysler Concorde/LHS
1995-1998
Dodge Intrepid/Eagle
Vision 1993-1997
1. Unclip the radio trim bezel and remove. (Figure A)
2. Remove (2) 3/8" hex-head screws securing the
factory head unit and disconnect the wiring.
3. Cut and remove all mounting tabs on the radio
housing EXCEPT shaded tabs. (Figure B)
Continue to kit assembly, page 25
(Figure A) (Figure B)
Dash Disassembly
Chrysler Cordoba/

Plymouth Fury 1975-1978,

Dodge Charger 1974-1978,
Magnum XE 1978-79
1. Remove (4) Phillips screws from the bottom edge
of the radio trim bezel.
2. Remove (2) Phillips screws above the radio
opening. (Figure A)
3. Unscrew the retainer ring securing the remote
mirror control and remove the bezel.
4. Remove (2) 3/8" hex-head screws securing the
factory head unit and disconnect the wiring.
5. Cut and remove all mounting tabs on the radio
housing EXCEPT shaded tabs. (Figure B)
Continue to kit assembly, page 25
(Figure A) (Figure B)
12
Chrysler Cordoba 1979-
1983, Imperial 1982-1983,
Newport/New Yorker
1980-1981, Dodge Mirada
1980-1983, St. Regis
1979-1981
1. Remove (2) Phillips screws above the radio
opening. (Figure A)
2. Remove (2) Phillips screws above the climate
controls. (Figure A)
3. Unclip the dash trim bezel and remove. (Figure A)
4. Remove (2) 3/8" hex-head screws securing the
factory head unit and disconnect the wiring.
5. Cut and remove all mounting tabs on the radio
housing EXCEPT shaded tabs. (Figure B)
Continue to kit assembly, page 25
(Figure A) (Figure B)