Metra AT-512CR Instrucciones De Instalación página 19

Dodge Neon/Plymouth
Neon 1994-1999
1. Remove the ashtray.
2. Unclip the radio trim bezel and remove. (Figure A)
3. Remove (2) 3/8" hex-head screws securing the
factory head unit and disconnect the wiring.
4. Cut and remove all mounting tabs on the radio
housing EXCEPT shaded tabs. (Figure B)
Continue to kit assembly, page 25
(Figure A) (Figure B)
Dash Disassembly
Dodge Omni/024/Rampage
1978-1982, Plymouth
Horizon/TC3 1978-1982,
Scamp 1983-1984
1. Remove (7) Phillips screws from the dash trim
bezel and remove the bezel. (Figure A)
2. Remove (2) 3/8" hex-head screws securing the
factory head unit and disconnect the wiring.
3. Cut and remove all mounting tabs on the radio
housing EXCEPT shaded tabs. (Figure B)
Continue to kit assembly, page 25
(Figure A) (Figure B)
19
Dodge Pickup/Ramcharger
1974-1980, Plymouth
Trailduster 1974-1980
1. Remove (4) Phillips screws from the top edge
of the dash trim bezel. (Figure A)
2. Remove (7) Phillips screws from the face of the
dash trim bezel.
3. Remove (3) Phillips screws under the dash
trim bezel.
4. Unclip the bezel and remove.
5. Remove (2) 3/8" hex-head screws securing the
factory head unit and disconnect the wiring.
6. Cut and remove all mounting tabs on the radio
housing EXCEPT shaded tabs. (Figure B)
Continue to kit assembly, page 25
(Figure A) (Figure B)