Ford Bronco Ii 1985-1988; Ford Ranger (Mini) 1985-1988 - Metra AT-512CR Instrucciones De Instalación

Ocultar thumbs Ver también para AT-512CR:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Ford Bronco II/Ranger
1985-1988
1. Remove (4) Phillips screws from the top edge of
the dash trim bezel. (Figure A)
2. Remove the light switch knob, cigarette lighter
and ashtray.
3. Unsnap the molding under the dash trim bezel and
remove (4) screws exposed. (Figure A)
4. Remove (4) screws securing the factory head unit
and disconnect the wiring.
5. Cut and remove all mounting tabs on the radio
housing EXCEPT shaded tabs. (Figure B)
Continue to kit assembly, page 25
(Figure A)
(Figure B)
Dash Disassembly
Ford Crown Victoria/LTD
(mini)
1979-1990, Mercury Grand
Marquis/Marquis
1979-1990
1. Open the ashtray and remove (2) Phillips screws
exposed. (Figure A)
2. Remove the dash trim bezel.
3. Remove (4) screws securing the factory head unit
and disconnect the wiring.
4. Cut and remove all mounting tabs on the radio
housing EXCEPT shaded tabs. (Figure B)
Continue to kit assembly, page 25
(Figure A)
(Figure B)
22
Ford Thunderbird/Mercury
Cougar 1985-1988
1. Remove (2) screws from the top of the dash
trim bezel. (Figure A)
2. Open the ashtray and remove (2) screws exposed
in the ashtray cavity. (Figure A)
3. Remove the dash trim bezel. Remove
(4) screws securing the factory head unit and
disconnect the wiring.
4. Cut and remove all mounting tabs on the radio
housing EXCEPT shaded tabs. (Figure B)
Continue to kit assembly, page 25
(Figure A)
(Figure B)

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Aw-512crCf-512crIbr-512cr

Tabla de contenido