Harness Buckle
Food, drink or other
debris may collect
inside the harness
buckle which can affect
proper function.
To clean, place in a
cup of warm water and
gently agitate the buckle. Press the red button
several times while in the water.
Shake out excess water and allow to air dry.
When inserting the buckle tongues, be sure
you can hear an audible click to make sure
the buckle is working properly.
DO NOT use child restraint if buckle tongues
DO NOT click into the buckle. Try cleaning the
buckle. If this does not remedy the problem,
please call Customer Service 1-877-242-5676
before using the child restraint.
Do not use detergents or lubricants.
Harness Straps
Sponge clean using warm water and mild
soap. Air dry. Do not iron.
LATCH Connectors
Sponge clean or thoroughly rinse LATCH
Connectors with warm water. Allow to
dry thoroughly. Test by connecting and
disconnecting until an audible CLICK is heard
after connecting each connector to a lower
LATCH anchor. If clicks are not heard, repeat
the cleaning procedure.
Plastic Parts
Wipe clean with mild detergent and warm
water.
Spot Cleaning
Spot clean Seat Covers, Shoulder Pads,
Buckle Pad, and the Infant Body Support
as needed with a clean cloth using mild
detergent and water.
NEVER IMMERSE THE LATCH OR HARNESS
STRAPS.
73