Technical Specification - 3M D8000 Serie Instrucciones De Uso

R = Reusable
NR = Non reusable (single shift use only)
End of Shelf Life. Date format - mm/yyyy
]
End of shelf life (use-by) date is marked on the product and
packaging.
For Single Use Only
)
Maximum Use Time 50 hours
(
Name and address of Manufacturer
:
Dispose in accordance with local regulations
J
Packaging not suitable for food contact.
K

TECHNICAL SPECIFICATION

3M gas/vapour filters generally protect against either single or
multiple contaminant type(s) and against particulates when
combined with a particulate filter. 3M combination filters generally
protect against either single or multiple gas/vapour type(s) and
against particulates.
Filter Type Colour Code Type of Contaminant
A Organic vapours with boiling
Brown
point >65°C (with good
warning properties) as
specified by the manufacturer
Inorganic Gases & Vapours
B Grey
(with good warning
properties) as specified by the
manufacturer
E Yellow Acid Gases (with good
warning properties) as
specified by the manufacturer
K Green Ammonia and Organic
Ammonia derivatives (with
good warning properties) as
specified by the manufacturer
Formaldehyde Olive green Formaldehyde vapour
Organic vapours with boiling
AX Brown
point equal or less than 65°C
(with good warning
properties) as specified by the
manufacturer
Hg Red Mercury vapour
Solid and non-volatile liquid
P White
aerosols
Gas/Vapour Filter Classes
Gas Filter Class APF* 3M™ Half Mask
1 10 or 1000 ppm (0.1% vol)
whichever is lower
10 or 5000 ppm (0.5% vol)
2
whichever is lower
Particulate filters can also be classified into one of three classes
depending on the efficiency in removing contaminants from the
inhaled air.
Particulate Filter APF* 3M™ Half Mask
Class
P1 4
P2 10
P3 20
*Assigned Protection Factors (APF) are taken from HSE
publications. Please refer to EN 529:2005 and National workplace
protection guidance for application of these numbers in the
workplace. Please contact 3M for further information.
3M™ D8000 Series Filters
Filter Type Classification Type of Contaminant
3M D8051 A1
3M D8055 A2
3M D8059 ABEK1
3M D8094 ABEK1P3 R
3M D8095 A2P3 R
APPROVALS
These products are type approved and audited annually by either:
BSI Group, The Netherlands B.V. Say Building, John M.
Keynesplein 9, 1066 EPAmsterdam, The Netherlands, Notified
Body No. 2797 and / or BSIAssurance UK Ltd, Kitemark Court,
DavyAvenue, Knowlhill, Milton Keynes MK5 8PP, UK, Notified Body
No. 0086. These products meet the requirements of European
Regulation (EU) 2016/425 and applicable local legislation. The
applicable European/local legislation and Notified Body can be
determined by reviewing the Certificate(s) and Declaration(s) of
Conformity at www.3m.com/Respiratory/certs.
4
Organic vapours with boiling
point >65°C (with good
warning properties) as
specified by the manufacturer
Organic vapours with boiling
point >65°C (with good
warning properties) as
specified by the manufacturer
Combination organic vapours
(b.pt > 65°C (with good
warning properties) as
specified by the
manufacturer), inorganic &
acid gases & ammonia
Combination organic vapours
(b.pt > 65°C (with good
warning properties) as
specified by the
manufacturer), inorganic &
acid gases, ammonia &
particulates
Organic vapours with boiling
point >65°C (with good
warning properties) as
specified by the manufacturer
and particulates