Chapter Ii Installation Instruction - SATA AE1021 Manual Del Uso

Chapter II Installation Instruction
- The installation of tire changer must be completed by professionals. Safe and effective use depends on correct installation.
- If you have any questions, please contact the authorized dealer of Sata.
2.1 Equipment size and use space
- The tire changer must be placed on a firm flat floor and fixed with bolts.
- The location where the tire changer is to be installed must be provided with power and air source for connection.
- In suitable placement location for tire changer, sufficient operation space must be reserved around the tire changer.
- Ensure that there is enough space above and behind the selected position for the auxiliary arm or reversing arm to work normally.
- Reserve at least 50 mm operating space on the right and front of the tire changer for tire mounting and tire pressing.
500
50
AE1021/AE1021-3/AE1021H/AE1021H-3
500
中文
EN DE RU KO
700
PT JA ES