Atos Medical Provox XtraHME Instrucciones De Uso página 12

Skin protection
Intended use
Skin protection products can improve the adhesion of Provox adhesives and
protects the skin by forming a thin, protective barrier.
How to use Skin Protection products
Application:
The skin should be clean and dry prior to application of the product. Apply a
uniform coating over the entire area around your stoma. Wait for the product
to dry (approximately 30 seconds). If you miss an area that you intended to
cover, wait until the original area of application has dried, then reapply to the
missed area.
For maximum protection, an optional second coating may be applied and
allowed to dry before applying the adhesive.
If the product is applied to an area with skin folds or other skin-to-skin contact,
make sure that skin-contact areas are separated to allow the coating to thoroughly
dry before returning to normal position.
PRECAUTIONS
• For external use only.
• Keep out of the reach of children.
• Avoid contact with eyes. In the case of accidental contact, flush eyes well
with water.
• Do not apply directly to open wounds.
• Should redness or other signs of irritation appear, discontinue use.
• Hold breath while applying skin protection as inhalation can irritate the air-
ways.
• Be careful that the liquid does not drip into the stoma.
12