Performing A Blood Glucose Test - Fora V20 Manual Del Usuario

Performing a Blood Glucose Test

Step 1
Insert the test strip to turn on the meter.
Wait for the meter to display the test strip "
symbol.
Step 2
Obtaining a blood sample.
Use the pre-set lancing device to puncture the
desired site. After penetration, discard the first drop
of blood with a clean cotton swab. Gently squeeze
the punctured area to obtain another drop of blood.
Be careful NOT to smear the blood sample.
The volume of blood sample must be at least 0.7
microliter ( μ L) of volume. ( actual size).
28
" and blood drop " "