Briggs & Stratton 130000 Manual Del Operador página 14

11
4. Place the unit on a level surface.
5. Clean the oil fill area of any moisture or debris.
6. Remove the dipstick (A, Figure 12) and wipe it with a clean
cloth. Set it aside.
14
12
7. To add oil, pour slowly into the engine oil fill tube (B). See
Specifications for the oil capacity. Do not overfill.
8. Wait one minute before checking the oil level.
9. Insert and tighten the dipstick, then remove it again to check
the oil level. It should be at the top of the full indicator (C).
10. When the oil level is at the top of the full indicator, install
and tighten the dipstick.
Adjusting the Skid Shoe Height
DANGER
This snowthrower contains a rotating auger to collect snow.
Fingers can quickly become caught and traumatic amputation
or severe laceration will result.
Turn the engine OFF, wait for all moving parts to stop, and
remove the ignition key or push/pull key before performing
any maintenance or repairs.