Chapter I; Summary; Technical Parameter - SATA AE5602T Manual Del Uso

Chapter I

Definition:
To ensure the stability of straight driving and the ease of manipulation, to reduce the wear of automobile tires
and other parts, it is necessary to consider many factors to determine the angle of the wheel and the ground, to
determine the relative position of the installation between the steering vehicle wheesl, steering knuckle, front
axle and the frame of car. This adjustment to maintain a certain position called the steering wheel alignment, also
known as front wheel alignment.
Previously the usual wheel alignment refers to the front wheel alignment, Now rear wheel alignment is also
included, that is, four wheel alignment. Completely four-wheel alignment is to detect the angle and position in the X.
Y. Z-axis between car frame, suspension components, wheels, and between the four wheels. Accurately measure
the vehicle by a special instrument, then compare the measurement results to the original design standard
parameter, adjust it to the standard range to achieve the best handling and driving performance
1
2
3
4
5
50
AE5602T

Summary

Technical Parameter

Distance from front target plates to camera
Maximum Wheelbase
Wheel Tread Range
Wheel hub Dimension
Beam Height
中文
EN DE RU KO
1.8 m ~ 2.4 m
3 m ~ 3.6 m
1.2 m ~ 2.3 m
10" ~ 22"
1,820 mm ~ 2,180 mm
PT JA ES