Sterling 2375 Serie Guia De Instalacion página 14

12. Install the Wall Jambs
Position the wall jamb against the wall. Align the holes in the wall jamb with the holes in the wall.
Secure the wall jamb with three #8-18 x 1-1/2" panhead screws.
Repeat this procedure for the second wall jamb.
13. Determine the Direction of Door Swing
Determine whether the door will pivot right or left.
Make sure the path of the shower door will not be obstructed as it swings open.
NOTE: The illustrations and instructions in this guide are for right pivot installations. Left pivot
installations will be opposite of what is illustrated and described.
1100676-2-C
Secure with three
#8-18 x 1-1/2"
panhead screws.
#8-18 x 1-1/2"
Panhead Screw
14
Left Pivot
120˚ Swing
Approximately
23-1/4" (59.1 cm)
Make sure the path of the
door is not obstructed as it
swings open.
Approximately
23-1/4" (59.1 cm)
Right Pivot
120˚ Swing
Sterling