Sterling 2375 Serie Guia De Instalacion página 17

18. Attach the Fixed Panels
NOTE: Perform the procedures below from the inside of the shower.
Confirm that the side panel is vertically level.
NOTICE: Do not overtighten the screws. If overtightened the screws will cause the opposite side of the
wall jamb to bow outward.
Secure the side panel to the wall jamb using three of the provided #8-18 x 3/8" self drilling screws.
Position each screw in a slot in the wall jamb and thread it into the side panel.
Make sure the wall jamb is still vertically aligned. Adjust by loosening the screws and sliding the
panel if needed.
Repeat with the second side panel.
Sterling
Wall Jamb
Slot
17 1100676-2-C