Compliance Information
Product Name
Model
Notice for USA
Notice for Canada
Notice for Europe
Notice for Japan
Notice for Australia
2000621_B
Rimage Everest Printer
CDPR22 (Everest III)
CDPR23 (Everest 600)
NOTE: This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when this
equipment is operated in a commercial environment. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause
harmful interference, in which case the user will be required to correct the interference
at his own expense.
This product complies with UL 60950-1, 1
This Class A digital apparatus complies with Canadian ICES-003 Issue 4:2004. Cet
appareil numerigue de la classe A est conforme a la norme NMB-003 du Canade.
This product complies with CAN/CSA-C22.2 No. 60950-1-03 1
This product is in conformity with the EMC Directive (89/336/EEC) and the Low-
Voltage Directive (73/23/EEC) through compliance with the following European
standards: EN 55022: 1998 + Amd 1: 2000 Class B Limit; EN 55024: 1998; EN 61000-
3-2:2000; EN 61000-3-3:1995 + Amd 1: 2001; EN 60950: 2000. The CE mark has
been affixed in accordance with the CE Marking Directive 93/68/EEC.
This is a Class A product based on the standard of the Voluntary Control Council for
Interference by Information Technology Equipment (VCCI). If this equipment is used in
a domestic environment, radio interference may occur, in which case, the user may be
required to take corrective action.
Translation:
この装置は、 情報処理装置等電波障害自主規制協議会 (VCCI) の基準に基づく クラス
A 情報技術装置です。 この装置を家庭環境で使用すると電波妨害を引き起こすことがあり
ま
す。 この場合には使用者が適切な対策を講ずるよう要求されることがあります。
This product complies with AS/NZS CISPR22:2004.
Important Information
edition.
st
edition.
st
5