Harbor Breeze KEYPORT Manual Del Usuario página 17

FINAL INSTALLATION
3. Partially insert three blade screws (BB) and blade
washers (DD) through a blade (K) and into a blade
arm (J). Tighten each blade screw (BB), starting
with the one in the middle. Repeat this step for the
remaining blades (K) and blade arms (J).
Hardware Used
BB
Blade Screw
DD
Blade Washer
4. Insert two motor screws (AA), along with lock
washers (CC), through one blade arm (J) to attach
the blade arm (J) to the motor (G). Tighten the
motor screws (AA) securely. Repeat this step for the
remaining blade arms (J), making sure to completely
secure each blade arm (J) before proceeding with
the next.
Hardware Used
AA
Motor Screw
CC
Lock Washer
3
BB
DD
x 15
x 15
4
x 10
x 10
17
J
CC
AA
Lowes.com/harborbreeze
K
G
K
J