Harbor Breeze KEYPORT Manual Del Usuario página 25

TROUBLESHOOTING
PROBLEM
There is excessive
wobbling.
The fan operates
correctly, but
the lights are
not working (if
applicable).
POSSIBLE CAUSE
1. The blades are loose.
2. The blade arms are incorrectly
attached.
3. The blades are unbalanced.
4. The fan is not securely
mounted.
1. The bulb(s) are not installed
correctly.
2. The light kit wire plugs are not
connected properly.
3. There is a faulty wire
connection.
4. The total power of the light is
exceeding 190 W.
CORRECTIVE ACTION
1. Tighten all blade screws.
2. Re-install the blade arms.
3. Switch one blade with a blade from
the opposite side.
4. Turn the power off. Carefully loosen
the motor housing and verify that the
mounting plate is secure.
1. Re-install the bulb(s).
2. Ensure that the male and female
plugs in the light kit fitter are
connected properly.
3. Turn the power off and check all
connections at the ceiling outlet box.
4. The fan comes with a 190 W limiter.
When the total watts of the lights is
over 190 W, the lights do not work.
Please replace the bulbs with lower-
wattage bulbs.
25
Lowes.com/harborbreeze