LIGHT KIT INSTALLATION
Note:
If you wish to install the fan without the light kit,
see Install the Fan Without The Light Kit on page
21.
1. Remove the three plate screws (KK) located on
the fitter plate (Q). Then connect the plug from the
motor (G) to the plug from the switch housing (O),
matching the colors on each plug. Ensure that the
plugs connect tightly.
Hardware Used
KK
Plate Screw
2. Align the holes in the switch housing (O) with the
holes in the fitter plate (Q). Re-insert the plate screws
(KK) and secure them with a Phillips screwdriver.
Hardware Used
KK
Plate Screw
1
Q
x 3
2
x 3
Q
KK
18
KK
O
Lowes.com/harborbreeze
G
O