Install The Fan Without The Light Kit - Harbor Breeze KEYPORT Manual Del Usuario

INSTALL THE FAN WITHOUT THE LIGHT KIT

1. To install the fan without the light kit, remove the
three plate screws (KK) from the fitter plate (Q) and
remove the light kit (H). Carefully place unused
wires back into the switch housing (O) and use the
plastic plug button (F) to plug the hole. Then re-install
the plate screws (KK) and secure with a Phillips
screwdriver
Hardware Used
KK
Plate Screw
1
Q
KK
x 3
21
H
O
F
Lowes.com/harborbreeze
KK