Final Installation - Harbor Breeze KEYPORT Manual Del Usuario

FINAL INSTALLATION

1. Remove the two mounting bracket screws (FF) from
the mounting bracket (E) and loosen the other two
screws about 1/4 in. Then align the canopy (C) up to
the ceiling over the loose mounting bracket screws
(FF). Place the keyholes of the canopy (C) into the
screws (FF) and rotate clockwise.
Hardware Used
Mounting Bracket
FF
Screw
2. Secure the canopy (C) with the previously removed
mounting bracket screws (FF) and securely tighten
all four screws (FF). Push the canopy cover (P) up
into the bottom of the canopy (C) until it is locked.
Note:

Closemount installation will not have the
downrod (A) and canopy cover (O).
Hardware Used
Mounting Bracket
FF
Screw
1
C
x 4
2
C
x 4
A
16
Lowes.com/harborbreeze
FF
FF
P