Assembly Of Symphony Pump Kit - Medela Symphony Instrucciones De Uso

7. Assembly of Symphony
Tip
T
Carry out all the steps with
care and assemble the pump
kit correctly for optimum
performance.
Parts Needed:
• Tubing
• Symphony pump
®
• Breastshields.
• Breastmilk bottles/
containers
• Lids
• Connectors
• Yellow Valve Heads
• White Membranes
• Membrane cap
• Protective membrane
Note
• Use Authentic Medela Spare
Parts only. See section 2 for
details.
• Check pump kit components
for wear or damage before use
and replace if necessary.
• All components must be
completely dry before use for
proper performance and to
prevent damage to the pump.
20
Pump Kit
®
1
Caution
Wash hands thoroughly with soap and water
before touching breastpump, kit and breasts. Avoid
touching the inside of containers or lids.
4
Push yellow valve head onto inner
ring of connector bottom.
7
Place the protective membrane
onto a flat surface and carefully
push the membrane cap down
until it engages.