Assembly Of Pump Kit - Medela symphony Instrucciones

8. Assembly of Pump Kit

Tip
T
Carry out all the steps with care and
assemble the pump kit correctly for
optimum performance.
Parts Needed:
• Tubing
• Symphony pump
®
• Breast shields
• Breast milk bottles/containers
• Lids
• Connectors
• Yellow Valve Heads
• White Membranes
• Membrane cap
• Protective membrane
Note
• Use Authentic Medela Spare Parts
only. See section 2 for details.
• Check pump kit components for
wear or damage before use and
replace if necessary.
• All components must be completely
dry before use for proper
performance and to prevent
damage to the pump.
16
1
Caution
Wash hands thoroughly with soap and
water before touching breast pump, kit
and breasts. Avoid touching the inside
of containers or lids.
4
Push yellow valve head onto
inner ring of connector bottom.
7
Place the protective membrane
onto a flat surface and carefully
push the membrane cap down
until it engages.