Speakerphone; All With; Peakerphone; Aking A - GE 27939 Guia Del Usuario

3. To end the call, press the SPEAKER button again.
M C

AKING A

ALL WITH

1. Press and release the SPEAKER button on the base unit and wait for a
dial tone.
2. Dial the number (using a memory dial number, if desired.) The number
you dialed shows on the display. Or, dial the number and then press the
SPEAKER button.
3. When the party answers, adjust speakerphone volume by pressing the
volume up or down arrow buttons.
4. To end the call, press the SPEAKER button again.
S B
WITCHING ETWEEN
You can switch between speakerphone and handset after dialing a number,
or any time during a conversation.
Speaker to Handset — Press TALK/callback on handset, then press speaker.
Handset to Speaker — Press SPEAKER, then hang up the handset.
I O
NTERCOM
I C
NTERCOM ALLING
The intercom feature of your phone system allows you to have an
unlimited-duration, two-way conversation between the handset and the
base unit without tying up the telephone line. Since the telephone line is
not being used, you can still receive incoming calls.
U I
SING NTERCOM
1. Make sure the phone is OFF (not in TALK mode).
2. Press the PAGE/intercom button. A paging tone sounds at the handset
and base. (To cancel intercom, press PAGE/intercom again.)
3. Wait for the person with the handset to press the int button to activate
the intercom.
4. When finished, press the PAGE/intercom button on the base to deactivate
the intercom.
S

PEAKERPHONE

S
PEAKERPHONE AND
PERATION
F B
ROM THE
H

ANDSET

ASE
19