Parameterization; Data Entry - ABB CoriolisMaster FCM2000 Instrucciones Para La Puesta En Funcionamiento

Pos: 22 /Standard-Layout/Überschriften/1/P - R/Parametrierung @ 0\mod_1132314985710_3101.doc @ 3160 @ 1 @ 1
6

Parameterization

Pos: 23.1 /Standard-Layout/Konfiguration, Parametrierung/Durchfluss/FCM2000/Dateneingabe @ 7\mod_1175003771750_3101.doc @ 74484 @ 2 @ 1
After the power to the device is switched on, a number of self-check routines are executed
automatically. Subsequently, the standard display (process information) appears. The
configuration of the display can be defined by the user.
6.1

Data entry

Data can be entered in various languages using three keys on the transmitter.
Fig. 12: Transmitter keypad and display
1
The magnet stick can be used to configure the device even when the housing cover is closed.
Warning − General risks!
When the transmitter housing is open, EMC protection and protection against accidental
contact are suspended.
When entering data, the transmitter remains online, i.e., current and pulse outputs still show the
current operating mode. The functions of the individual keys are explained below:
CI/FCM2000-EN
Points for inserting the magnet stick
C/CE Toggle between operating mode and menu.
The STEP key is one of two arrow keys. Use STEP to scroll forward

STEP
through the menu. All the required parameters can be called up.
The DATA key is one of two arrow keys. Use DATA to scroll backward

DATA
through the menu. All the required parameters can be called up.
ENTER The ENTER function requires that both arrow keys, STEP and DATA, be
pressed simultaneously. ENTER has the following functions:
• Access the parameter to be changed and set the new, selected, or
default parameter.
The ENTER function is effective for approx. 10 s only. If a new value is not
entered within 10 s, the transmitter display reverts to the old value.
CoriolisMaster FCM2000
N
S
N S N S
1
Parameterization
1
1
G00377
EN - 29