KTM 62012027000 Manual Del Usario página 8

8
Mounting the cover trim (optionally available):
- Mount the range change metal nuts (scope of delivery of the trim)
on the trim.
- Position the trim on the Top Case cover, mount with screws and
seal rings from the inside (scope of delivery of the trim) and tighten.
Universal mounting:

- Move the carrier plate (included) to the mounting position.
- Mount and tighten screws M6x35

hex nuts (all included).
Mounting the SMT model:

- Move the carrier plate (included) to the mounting position.
- Mount and tighten screws M6x40

hex nuts (all included).
Opening the case:

- Set the key (included) to "Open".
- Push in the lock and the handle opens.
  
, bushings , washers
  
, bushings , washers
and
and