KTM 62012027000 Manual Del Usario página 9

- Pull the fl ap up and the case opens.
Closing the case:
- Close the case cover.
- Push the handle down until you hear the locking mechanism snap
into place.
- Set the key to "Close".
Detaching the case from the carrier plate:

- Set the key (included) to "Release".
- Push in the lock and the handle opens.
- Pull the locking cap forward.
- The case can now be separated from the carrier plate.
Mounting the back rest (optionally available):
- Drill 5-mm holes for M5 screws into the lower part of the Top Case
at the marked points.
9