Mounting Plate - PEERLESS CM850 Instalación Y Montaje

Place installation tab over sliding arms of wall mount assembly (G) to lock them in place.
6
Thread two M10 x 15 mm screws (I), leaving .25" exposed thread, into top holes on back of adapter plate (D).
7
Hook adapter plate (D) to mounting plate and attach using two bottom M10 x 15 mm screws (I) as shown in
figures 7.1 and 7.2. Tighten screws using 6 mm allen wrench (not included).
fig. 7.1
MOUNTINg PLATE
(NOTE: MOUNTINg PLATE
SHOWn WITHOUT FULL
WALL MOUNT ASSEMBLy
FOR CLARITy)
D
I
INSTALLATION TAB
SLIDINg ARM
G
D
MOUNTINg PLATE
I
fig. 7.2