Mounting Plate - PEERLESS SmartMount SP850-UNL Instalación Y Montaje

Place installation tab over sliding arms of wall mount assembly (A) to lock them in place.
3
Installing Adapter Plate
Thread two M10 x 15 mm screws (K), leaving .25" exposed thread, into top holes on back of adapter plate (EE).
4
Hook adapter plate (EE) to mounting plate and attach using two bottom M10 x 15 mm screws (K) as shown in fig-
ures 4.1 and 4.2. Tighten screws using 6 mm allen wrench (not included).
fig. 4.1

MOUNTING PLATE

(NOTE: MOUNTING PLATE
SHOWN WITHOUT FULL
WALL MOUNT ASSEMBLY
FOR CLARITY)
INSTALLATION TAB
SLIDING ARM
A
EE
K
7 of 22
EE
K
ISSUED: 4-03-07 SHEET #: 202-9177-5 02-15-10
MOUNTING PLATE
fig. 4.2