Safety Instructions/Symbols On The Equipment; Symbols In The Manual; General Safety Instructions - FLORABEST FSG 85 C2 Traducción Del Manual De Instrucciones Original

GB MT
Safety instructions/symbols
on the equipment
Warning!
Risk of injury from the rotating tool!
Keep hands away.
Risk of electric shock!
Disconnect from the mains before
carrying out maintenance and re-
pair work.
Do not expose the unit to rain.
Read and observe the operat-
ing instructions pertaining to the
equipment. Also observe the safety
instructions for your chainsaw and
replacement saw chain.
Risk of injury!
Wear ear, eye and hand protec-
tion!
Wear breathing protection.
Risk of cuts!
Wear cut-resistant gloves.
Never use faulty grinding disks.
Safety class II
Do not dispose of electrical equip-
ment in household waste.
Dimensions grinding disk
52

Symbols in the manual

Warning symbols with in-
formation on damage and
injury prevention.
Instruction symbols (the instruction is
explained at the place of the excla-
mation mark) with information on
preventing damage.
Help symbols with information on
improving tool handling.

General safety instructions

Safe operation:
Keep work area clear.
•
Cluttered areas and benches invite in-
juries.
Consider work area environ-
•
ment.
- Do not expose tools to rain. Do not
use tools in damp or wet locations.
Water entering a power tool will in-
crease the risk of electric shock.
- Keep work area well lit.
- Do not use tools in the presence of
flammable liquids or gases.
Power tools create sparks which may
ignite the dust or fumes.
Guard against electric shock.
•
Avoid body contact with earthed or
grounded surfaces (e.g. pipes, radia-
tors, ranges, refrigerators).
Keep other persons away.
•
Do not let persons, especially children,
not involved in the work touch the tool
or the extension cord and keep them
away from the work area.
Store idle tools. When not in use,
•
tools should be stored in a dry locked-
up place, out of reach of children.
Do not force the tool. It will do
•