Safety Instructions; Symbols - FLORABEST FGS 3.6 B2 Traducción Del Manual De Instrucciones Original

Sound power level (L
guaranteed ........................... 80 dB(A)
measured ......77.4 dB(A); K
Vibration (a )
h
at handle ......... 1.29 m/s
Battery (Li-Ion)
Nominal voltage ........ 3.6 V
Loading time .................. approx. 3-5 h
Charger ......................XZ0600-0600
Rated input ............................ 100-240 V~;
........................................ 50/60 Hz; 0.3 A
Rated output .......................6 V
Protection class ...............................
Protection category.......................... IP20
The noise and vibration levels have been
calculated according to the norms stated in
the conformity statement.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another. The stated
vibration emission value may also be used
for a preliminary exposure assessment.
Warning: The vibration emission
value may differ during actual use of
the power tool from the stated value
depending on the manner in which
the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched off
and times when it is switched on but
running without any load).
)
WA
=2.09 dB
WA
2 , K=1.5 m/s
; 1.5 Ah
; 0.6 A

Safety Instructions

This unit can cause serious in-
jury if not used correctly. Be-
fore using the unit, carefully
2
read through the instruction
manual and familiarise your-
self with all of its controls.

Symbols

Symbols in the manual
Warning symbols with in-
II
formation on damage and
injury prevention.
There is a risk of injury from
electric shock.
Instruction symbols with information
on preventing damage.
Help symbols with information on
improving tool handling.
Symbols on the unit
Before using for the first time, care-
fully read through the user manual.
Attention!
Remember that the cutting equip-
ment will continue to move after
switching the unit off.
Do not use the unit during rain, bad
weather damp surroundings or on
wet grass or hedges.
Danger due to materials blown out
of machine!
GB IE
23