Be Cool slide Manual Del Usuario página 10

EN
¡IMPORTANT! Keep these instructions
for future reference.
WARNING: Put the brake on when getting children in
and out of the pushchair.
WARNING: Any load suspended from the handlebar
and/or the rear part of the backrest and/or the sides
of the pushchair will affect its stability.
WARNING: only use replacement parts supplied or
recommended by Be Cool.
WARNING: Never leave your child unattended.
WARNING: This seat unit is not suitable for children
under 6 months.
WARNING: Suitable for children under 6 months old
only with accessories approved by BE COOL.
WARNING: Ensure that all the locking devices of the
baby carrier and the pushchair are engaged before
use.
WARNING: To avoid injury ensure that your child is
kept away when unfolding and folding this product.
WARNING: Do not let your child play with this product.
WARNING:! Use a harness as soon as your child can sit
18
unaided.
WARNING: This vehicle is designed for children from 6
months and weighing up to 15 kg.
WARNING: Always use the restraint system.
WARNING: Check that the Top/Cocoon/Match/Zero
or seat unit fastening devicesare correctly engaged
before use.
WARNING: This product is not suitable for running or
skating.
Never use accessories that have not been approved
by BE COOL.
This pushchair may only be used by one child at a
time.
The maximum load carried in the basket must never
exceed the limit indicated on the basket (4 kg).
Take care when going down escalators as the rear
safety catch may come undone. COMPLIES WITH
EUROPEAN SAFETY REGULATIONS EN 1888:2018.
This vehicle does not replace a cot or a bed. If the
child needs to sleep you should put him in a suitable
carrycot, cot or bed.
INSTRUCTIONS FOR ASSEMBLY AND USE
1.
OPENING THE CHASSIS
A:Open the catch as the arrow direction.
B:Hold the handlebar with one hand, and hold the front
tube with another hand, then open the chasis as the arrows
direction until "click" sound.
2.
ASSEMBLING THE FRONT WHEELS
A:Connect the front wheel to the connect pieces as the arrow
direction.
B:To close the swivel-function: lift up the swivel lock button.
C:To release the front wheel: press the button on the connec-
tor pieces.
3.
ASSEMBLING THE REAR WHEELS
A:Connect the rear wheels as the arrow direction.
B:To release the rear wheels: pull out the metal button and
remove the rear wheels as the arrow direction.
4.
APPLYING THE BRAKES
A:To engage the brakes: step down the brake pedal.
B:To release the brakes: lift up the brake pedal with your foot.
5.
FITTING AND REMOVING THE HAMMOCK
Your Slide is fitted with the pro-fix system. With this system,
the hammock can be attached perfectly to the chassis. To
take the hammock off, simultaneously pull the unlocking
levers situated on both sides of the hammock (5.1 - 5.2). The
hammock is reversible so it can be positioned facing you or
facing forwards
6.
ADJUSTING THE HANDLEBAR HEIGHT
A:Press the buttons of bothside and pull the handlebar
upwarkds or downwards.
7.
FOLDING THE PUSHCHAIR
A:Furl the canopy as the arrow direction.
B:Press down the 2nd safety button and pull upwards the
folding triggers on the backside of side bars. then press down
the handlebar until the pushchair is folded
C:The folding carth will work.
ATTENTION: THE PUSHCHAIR COULDN'T BE FOLDED WHEN
THE HAMMOCK IS FACING THE PUSHER AND THE HAMMOCK
IS ON THE UPRIGHT POSITION!
8.
OPENING THE PUSHCHAIR
A:Release the folding catch as the arrow direction and lift up
the handlebar with your two hands until "click" sound.
9.
PRO-FIX SYSTEM
The chassis of your pushchair includes the PRO-FIX system,
ready to fit the following car safety elements: Cocoon, Top,
EN
19