Publicidad
Idiomas disponibles
Idiomas disponibles
within the first 20 seconds of turning the ignition key on. If you wait longer
then the 20 seconds you will have to turn the ignition off then back on
again.
•Within the first 20 seconds if any button other then Volume Up or Volume
Down is pushed, the remapping process will stop.
•If during the remapping process no button is pushed for 30 seconds the
remapping process is aborted and the original settings are reset.
So let's begin the remapping process:
1) Ideally having the ASWC visible is recommended since you can see the
led flashes to confirm button recognition.
2) Turning off the radio is recommended.
3) Within the first 20 seconds of turning the ignition on, press and hold
down the Volume Up button for at least 25 seconds.
4) The led will light up solid red. Release Volume Up and the led will go out.
Volume Up has now been programmed.
5) Follow the list below in order however pushing the steering wheel control
button you want for the function below. If you want to skip a command
press the Volume Up on the steering wheel, this will tell the ASWC to
skip the command and go to the next one.
1. Volume Up
2. Volume Down
3. Seek Up/Next
4. Seek Down/Prev
5. Source/Mode
6. Mute
7. Preset Up
8. Preset Down
9. Power
16
Publicidad
