Publicidad
Idiomas disponibles
Idiomas disponibles
A brief overview of the ASWC interface and wire harness:
On the top of the ASWC interface there are three points of interest:
1) The Programming led – this will fl ash rapidly when in auto detect mode,
fl ashes slowly in manual programming mode.
2) The Reset button – Hold down button more then 2 seconds but less then
10 seconds to start auto detect mode; hold down longer then 10 seconds
to start manual programming mode.
3) The slide cover for the USB update port – open this up to reveal the USB
update port. Using the USB-CAB update cable and the Axxess website
you can make sure you always have the latest, updated inventory.
USB PORT COVER
3
RESET BUTTON
PROGRAMMING LED
Publicidad
