Publicidad
Idiomas disponibles
Idiomas disponibles
Brown/White goes to Brown/Black.
5) For all other radios, plug in the male 3.5mm connector of the ASWC into
the back of the aftermarket radio, designated for an external SWC
control interface. Please refer to the aftermarket radios manual if you
are in doubt where the 3.5mm connector of the ASWC goes.
Once all connections have been made, plug in the aftermarket radio if not
done already.
Programming the ASWC
The ASWC can be programmed in two ways; it can do it by itself in Auto
Detect Mode or it can be manually programmed. We will start with the Auto
Detect Mode first:
Auto Detect Mode:
The ASWC has the ability to auto detect certain vehicles and to know what
aftermarket radio it is connected to. The vehicle info sheet from the Axxess
website (www.axxessinterface.com) will show if your vehicle would be auto
detected and what action, if any, is required by you for this process to take
place.
For the Auto Detect feature to work there are 3 possible actions, however
only one action will be required by you depending on your vehicle:
1) Turn the ignition on and no other action is required.
2) Turn the ignition on, press and hold down the Volume Up button on the
steering wheel.
Or
3) Turn the ignition on, press and release the Volume Up button repeatedly
on the steering wheel.
6
Publicidad
