Using The Control Panel - HP LineJet Serie Guía De Referencia Rápida

Chapter 1
Basic Operating Procedures
When you power on the printer, it runs a self-test. Depending on
how the power-up state is configured, the printer will either be
online or offline after the test. The default power-up state is offline.
When the self-test completes and the software has initialized
successfully "OFFLINE" appears in the display.
If there is a fault during the self-test, the status indicator flashes and
a specific fault message appears on the display (such as "LOAD
PAPER"), also the alarm sounds if it is configured to. See page 85
for information on fault messages.

Using the Control Panel

Use the control panel to perform routine operations:
•
Placing the printer in the online or offline mode
•
Advancing or retracting the paper, and setting the top-of-form
•
Clearing fault conditions
•
Configuring the printer
•
Running printer self-tests
OFFLINE
CONFIG. CONTROL
LOAD PAPER
18