HP LineJet Serie Guía De Referencia Rápida página 51

TOF Indicator
Vertical Position
Knob
24.
Align the top of the first print line with the TOF indicator on the
tractor by rotating the vertical position knob.
A Thin Paper
B
Medium Paper
C Thick Paper
25.
Lower the forms thickness lever. Set it to match the paper
thickness.
(The A-B-C scale corresponds approximately to 1-, 3-, and 6-
part paper thickness. Adjust until you have the desired print
quality.)
26.
Press CLEAR to clear any fault messages (such as "LOAD
PAPER") from the Liquid Crystal Display.
27.
Press SET TOF. The top-of-form you have set moves down to
the print position. If there are data in the buffer, the paper
moves forward to the last print position on the next page.
28.
Press ON LINE and close the printer cover.
51
Reloading Paper
Perforation