HP LineJet Serie Guía De Referencia Rápida página 81

1.
Power off the printer and unplug the power cord.
2.
Unload the paper supply (page 52).
3.
Remove the ribbon (page 54).
Ribbon Path Diagram
Base Pan
4.
Using a soft-bristled, non-metallic brush, remove dust particles
from the paper path, ribbon guides, and ribbon path. Refer to
the ribbon path diagram on the shuttle cover.
5.
Brush and vacuum accumulated dust or residue, especially in
the tractor and base pan areas, and around the exterior of the
hammer bank.
6.
Wipe the splined shaft with a soft cloth.
7.
Using a cloth dampened with anhydrous alcohol (no water),
clean the ribbon guides. Do not let alcohol drip into the hammer
bank.
81
Cleaning The Printer
Splined Shaft
Hammer Bank
(hidden)
Ribbon Guide