HP LineJet Serie Guía De Referencia Rápida página 87

CLEAR PAPER JAM
Clear jam and reload paper (page 77). If this message recurs,
contact your Hewlett-Packard Customer Service Engineer.
CLOSE PLATEN
The forms thickness lever is open. Close the forms thickness lever.
FRAMING ERROR
Serial framing error (serial interface). Check your serial host
interface parameter settings; if necessary, adjust them so that they
match the settings of the attached host.
HAMMER COIL BAD
Coil # failed current test at power-up. Record message, clear to
continue printing, and contact your Hewlett-Packard Customer
Service Engineer.
LOAD PAPER
Printer is out of paper. Load paper.
87
Fault Messages