Setting Top-Of-Form - HP LineJet Serie Guía De Referencia Rápida

Chapter 1
Basic Operating Procedures

Setting Top-Of-Form

The top-of-form setting determines where the first line of print
appears on a page. Be sure to set the top-of-form under the
following conditions:
•
Before each new print job
•
After loading paper
•
After clearing a paper jam
1.
Make sure the printer is in offline mode. (Press ON LINE to
toggle from online to offline mode.)
2.
Open the printer cover and raise the forms thickness lever. (If
the cover and lever are already raised, go directly to Step 4.)
3.
Press CLEAR to turn off the alarm.
You can set the top-of-form with the indicator on the tractor. If you
have a cabinet model, you can also use the label on the paper path.
See the following pages.
Forms Thickness Lever
38