Serpento ASPID 150 Manual De Usuario página 74

• ASPID 150
MANUAL DEL USUARIO
I. Loose the locking nut ®
2. Turn the adjuster2 to the end in the direction of clockwise.
3. loose the locking nut ® and move the adjuster ® to make clearance up to 4mm.
4. Tighten the locking nut ® and ® and finally cover the rubber.
During this time, lubricate the cable with machine oil.
Adjustment of the Driving Chain Adjusting the tightness of driving chain alter running for every 1,000 km.
I. Support the motorcycle with the center stand.
2. Remove the cotter phipand loose the nut® and ;
3. Adjust the adjuster ® to make the tightness of driving chain so that the movable distance between the two
Chain sprockets is kept within 20 - 30mm. the marks of the two adjuster must be at the same scale to make the right wheel position .
4.tight the nut and lock with a new cotter pin.
33