Serpento ASPID 150 Manual De Usuario página 77

36
Abrasion of rear brake
If the front and the rear brake arc adjusted at the stated value without prefect effective,pls change discreteness of the arrester to ensure safety.
Front rear brake lamp switch
The position of front brake switch is under the brake handle.Loosening screw,
moving the switch,find out the proper fixed point to lit lamp.
Rear Brake Lamp Switch
This switch is mounted at the right-chassis. To adjust it up and down can make the brake lamp being lit on treading on pedal with a little force.
Tire
Check the air pressure and tire tread. For the sake of safety and longer service time, the air pressure of tire should be often checked.
Air Pressure of Tires
If the air pressure of tires is not su¬fficient, it not only speeds up the wear¬ing of tire, but also extremely affects the stability of motorcycle.
Insufficient air pressure makes the motorcycle difficult to turn. But excessive air pressure may decrease the contact area between the tire and
ground and lead to the slipping of motorcycle and even losing control. The air pressure should be always kept with the specified limit. Adjust
the air pressure as the tire is cold.
Air pressure of tires: (kg/cm2) Outer Tire Tread
Front tire:
Rear tire:
One person Two person
1.75 2.00
2.25 2.25