Pioneer AVIC-F20BT Manual De Instalación página 11

Connecting the System
The navigation unit
Power cord
RCA connector
15 cm
Yellow/black
If you use an equipment with mute function, connect that equipment to the
Audio Mute lead. If not, keep this lead free of any connections.
Note
Audio source will be set to mute or attenuate, while the following sounds
will not be muted or attenuated. For details, see Operation Manual.
— voice guidance of the navigation
— incoming ringtone and incoming voice of the mobile phone that is
connected to this navigation system via Bluetooth wireless technology
Blue/white (*6)
The pin position of the ISO connector will differ
depending on the type of vehicle. Connect *6 and
*7 when Pin 5 is an aerial control type. In other
types of vehicle, never connect *6 and *7.
Fuse (10 A)
Blue/white (*7)
To auto-aerial relay control
terminal (max. 300 mA 12 V DC).
Section
03
11
Engb