STA-RITE vx Manual Del Producto página 13

1. GENERAL INFORMATION
1.1 Supplied documents
1.1.1 Manual
1.2 Information ownership
1.3 Machine identification data
1.4 EC declaration of conformity
1.5 General information on safety
1.5.1 Personnel qualification
1.5.2 Special compliance
1.6 Conventions
1.6.1 Word conventions
1.6.2 Typographical conventions
1.7 Expected uses
1.7.1 Expected uses
1.7.2 Expected modes of installation
1.8 Non expected uses
1.8.1 Liabilities resulting from non expected uses
1.9 Warranty
1.10 Service
1.11 How to use the supplied documents
2. DESCRIPTION
2.1 Description
2.1.1 Architecture and operating principles
2.1.2 Machine structure
2.2 Technical features
2.2.1 Noise
2.2.2 Liability
3. INSTALLATION
3.1 Hoisting
3.1.1 Machine free from any type of packaging
3.1.2 Machine packed in cardboard box
3.1.3 Machine packed in a wooden crate
3.1.4 Machines secured on a supporting surface
3.2 Transport
3.3 Storage
3.3.1 Characteristics of the storage area
3.3.2 Environmental characteristics of the storage area
3.4 Preliminary checks
3.4.1 Check for damages
3.4.2 Damage signalling
3.5 Preparation of the installation area
3.5.1 Characteristics of the installation area
3.6 Installation
3.6.1 Connection to piping
3.6.2 Terminal box position
3.6.3 Connection to the electric system
3.7 Adjustment
3.7.1 Machine motor coupling adjustment
4. USE
4.1 Priming
4.1.1 Machines installed under head
4.1.2 Machines installed above head (suction mode)
4.2 Starting
4.3 Start and stop frequency control
5. MAINTENANCE
5.1 Lubrication
5.2 Temporarily quiescing
5.3 Periodical inspection
5.4 Extraordinary maintenance
6. OPERATION TROUBLES
7. DISMANTLING
7.1 Disconnecting the machine
7.2 Residual risks after disconnection
Index