General Information; Supplied Documents; Manual; Information Ownership - STA-RITE vx Manual Del Producto

1. GENERAL INFORMATION

1.1 Supplied documents

1.1.1 Manual

Data
Instruction manual
Issue 1
Version 1105
Code 253P7530
Recipients
This manual is dedicated to the operators charged of the
machine management during all the phases of its technical life
Contents
This manual includes the following information:
- Manufacturer declaration
- Information on safety
- Sales information
- Information on documents
- Machine description
- Transport information
- Storage information
- Installation information
- Adjustment information
- Use information
- Maintenance information
- Dismantling information
These pieces of information are subdivided into the following
chapters and appendixes of this manual:
Chapter 1 : General information
Chapter 2 : Description
Chapter 3 : Installation
Chapter 4 : Use
Chapter 5 : Maintenance
Chapter 6 : Operating troubles
Chapter 7 : Dismantling
Appendix : Product specification

1.2 Information ownership

The information contained in this manual is owned by SACI
The reproduction, also partial, of this manual is forbidden without
the express authorisation of SACI PUMPS
The information contained in this manual only concerns the
machine specified in the "Product specification" section.
SACI PUMPS reserves the right to make to the
machines the changes not specified in "Machine identification
data" whenever deemed right.

1.3 Machine identification data

Machine acronym
VX
Centrifugal electric pump
Vertical multistage
with "in line" mouth
VX cast iron base
VXI steel base AISI 304
VX SS steel base AISI 316
Nominal delivery in m 3 /h
Number of stages (= nr. of impellers x 10)
Number of impellers (used when lower
than the number of stages only)
Version with oval flanges
Version with round flanges.
VXI VX SS 4 - 80 / 7 (A) (F)

1.4 EC declaration of conformity

See page 2

1.5 General information on safety

We recommend to carefully following the instructions contained in
this manual, paying special attention to notes, attention and
danger warnings.
Attention The user must always comply with the
accident prevention local prescriptions in
force in the Country where the product is
installed.
Danger When carrying out repair or maintenance
operations on the motor-pump, remove the
plug from the outlet and/or turn off the
switch (if existing) disconnecting in this
way the power supply to the motor-pump.
This will prevent the accidental starting
which may cause damages to people and/or
things.
Danger Never carry out maintenance, installation or
handling operations on the motor-pump
with the electric system live: this may
cause serious accidents to people, even
their death.
Attention During operation, do not remove or handle
the motor-pump.
Danger Before using the motor-pump, check every
time that the cable and all the electric
devices are efficient, repaired and pro-
tected.
Danger When starting the motor-pump (by connect-
ing the plug to the outlet and/or turning off
the switch) make sure not to be barefoot
and that your hand are not wet.
The non-compliance to the procedures and
safety precautions contained in the sup-
plied documents causes the exclusion of
SACI PUMPS from any liability.