Noise; Liability; Installation; Hoisting - STA-RITE vx Manual Del Producto

Machine VX - VXI - VX SS
2B-30/2A
2B-30 ÷ 2B-110 A
2B-130 ÷ 2B-260 F
4-20A ÷
4-30 ÷ 4-100 A
4-120 ÷ 4-260 F
8-20 A ÷ 8-30 A
8-40 ÷ 8-200 F
16-30/2 ÷ 16-30 F
16-40 ÷ 16-160 F
32-1 ÷
32-2 ÷ 32-4
32-5 ÷ 32-10
32-11 ÷ 32-14

2.2.1 Noise

Sound pressure weighed equivalent continuous maximum level A
issued by the machine: 82 dB (A)

2.2.2 Liability

SACI PUMPS is not liable if the values shown in this
paragraph are not complied with.

3. INSTALLATION

3.1 Hoisting

The machine hoisting can be made under one of the following
conditions:

- Machine free from any type of packaging

- Machine packaged in a cardboard box
- Machine packaged in a wooden crate
- Machine secured on a supporting surface
3.1.1 Machine free from any type of packaging
It is possible to hoist one machine at a time only:
- for machines having a weight lower than 25 kg: hand hoisting
made by one person
- for machines having a weight between 25 and 50 kg: hand
hoisting made by two persons
- for machines having a weight exceeding 50 kg: hoisting using
hoisting means and sling

3.1.2 Machine packed in cardboard box

It is possible to hoist more than one machine packed in a
cardboard box depending on the machine weight. The packed
machines are kept in position using filling inert material used to fill
the box.
Pressure (bar)
3 4 6 10 15
x
x
x
x
x
x
x
x
x
x
x
x
x
x
- for machines having a weight lower than 25 kg: hand hoisting
made by one person
- for machines having a weight between 25 and 50 kg: hand
hoisting made by two persons
- for machines having a weight exceeding 50 kg: hoisting using
hoisting means and sling

3.1.3 Machine packed in a wooden crate

It is possible to hoist more than one machine packed in a wooden
crate depending on the machine weight. Packed machines are
kept in position using wooden spacers
- for machines having a weight lower than 25 kg: hand hoisting
made by one person
- for machines having a weight between 25 and 50 kg: hand
hoisting made by two persons
- for machines having a weight exceeding 50 kg: hoisting using
hoisting means and sling

3.1.4 Machines secured on a supporting surface

It is possible to hoist more than one machine secured by means
of fixing nuts on a surface having bent sides. The packed
machines are kept in position using wooden spacers.
Position on a suitably sized pallet and hoist using hoisting means.
Danger Risk of machine fall.
Do not stand under the machine during
hoisting.
Attention Make sure that during hoisting the machine
is kept in vertical position with the motor in
the upper part.