Watching Tv Channels; Selecting The Analog And Digital Channels; Changing Channels - Pioneer PDP-42A3HD Manual De Instrucciones

Basic Operations

Watching TV channels

Unless you set up TV channels that you can watch under the
current conditions, you cannot tune in those channels. For the
procedure, see "Setting up TV channels" on page 24.
• When watching a digital TV program, you may see emergency alert
messages scrolling at the top of the screen. Those messages are
broadcast by TV stations as necessary when in emergency situations.

Selecting the analog and digital channels

You can select the input mode between analog and digital
channels by pressing the INPUT button.
• When you switch the input mode, the last channel you previously
selected will be received.

Changing channels

To increase the channel number, press the CH + button on the
remote control unit. To decrease the channel number, press the
CH – button .
• CHANNEL +/– on the Plasma Display has the same
function as CH +/– on the remote control unit.
Using 0 – 9 on the remote control unit
Select channels directly by pressing buttons 0 to 9.
EXAMPLE
• To select channel 5 (1-digit channel), press 5.
• To select channel 25 (2-digit channel), press 2 then 5.
• To select channel 125 (3-digit channel), press 1, 2, then 5.
• To select subchannel 10-1, press 1, 0, •(dot), then 1.
• Pressing the CH ENTER button after entering the channel number,
enables you select channels quickly.
• To return to the previous channel, press the CH RETURN button.
TV
INPUT HD WIDE
AV SELECTION SOUND EFFECT SCREEN SIZE
1 1 2 2 3 3
4 4 5 5 6 6
7 7 8 8 9 9
0 0 CH
ENTER
C.C. SLEEP
FAVORITE
CH DISPLAY
OK
CH
RETURN MENU
EXIT BACK
CH VOL
MUTING
06
19
En