Chapter 2: Getting Started; Installing The Battery; Connecting Wired Audio Accessory - Motorola Solutions CLP Serie Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Chapter 2
Getting Started
This section helps you to get familiar with the basic operations of the radio.
2.1

Installing the Battery

Procedure:
1 At the bottom of the battery door, lift the latch up and remove the battery door of the radio.
2 Align the battery contacts to the tabs of the battery compartment.
3 Insert the end with the battery contacts before pressing the battery down to secure in place.
4 Place the battery door on the radio and push the latch down to lock the battery door.
Figure 2: Battery Installation
2.2

Connecting Wired Audio Accessory

Prerequisites: Turn the radio off.
Procedure:
1 Plug the audio accessory into the radio with the unlock icon on the audio accessory facing the
front of the radio.
Ensure the indicator on the audio accessory and the radio is aligned.
MN006179A01-AC
Getting Started
17

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Clp1010eClp1080eClp1013eClp1083e

Tabla de contenido