Charging With The Drop-In Tray Muc-Optional Accessory - Motorola Solutions CLP Serie Manual Del Usuario

MN006179A01-AC
Chapter 3: Battery and Charger
4 Insert the radio with battery installed into the tray, facing down and making sure that the
charging contacts on the charger are aligned with the contacts on the radio.
Figure 8: Charging Radio
NOTICE: When charging a battery attached to radio, ensure that the radio is turned off.
You can enable or disable the radio to automatically turn off when radio is inserted into
the charger feature through Customer Programming Software (CPS).
3.8

Charging with the Drop-In Tray MUC-Optional Accessory

The Multi-Unit Charger (MUC) allows drop-in charging of up to six radios. Each of the six charging
pockets can hold a radio with a battery installed. The MUC provides pockets for headset storage.
Procedure:
1 Place the charger on a flat surface or mount it on the wall.
2 Insert the power cord plug into the jack on the MUC.
3 Plug the cord into an AC outlet and then into the charger.
4 Turn off the radio.
NOTICE: When charging a battery attached to radio, ensure that the radio is turned off.
You can enable or disable the radio to automatically turn off when radio is inserted into
the charger feature through Customer Programming Software (CPS).
5 Insert the radio facing down with battery installed into the charging pocket, ensuring that the
radio contacts are aligned with the MUC contacts.
NOTICE: The battery can be charged by using the slot on the flat surface of the charging
pocket.
30